simfere.blogg.se - Failure to obtain a verilog simulation license

#Failure to obtain a verilog simulation license serial number
#Failure to obtain a verilog simulation license install
#Failure to obtain a verilog simulation license verification

If you ordered a network license we will usually email you the correct license file. Replace the correct USB key then repeat, or repeat using the correct license file. If they don’t you either have the wrong license file or the wrong USB key.

#Failure to obtain a verilog simulation license serial number

The serial number is on the "SERVER" line after "FLEXID=".

The serial number that the license expects can be found by opening the license file in a text editor.

The USB key’s serial number is printed on the side and is in the form 9-xxxxxxxx (green key) or 10-xxxxxxxx (blue key) where xxxxxxxx for are hexadecimal digits.

The serial number of the USB key must match the license file. It means that a valid USB key was found but it is not the correct one for the license. This error will be displayed after pressing "OK" in response to the instruction to insert a USB key (dongle).

You may contact us at and will be glad to assist. The situation where the license manager is shared with other applications.

If any are left, many strange problems can ensue. Pdt.exe will only be present if you use SIMPLIS. With other vendors applications, we recommend that you kill it using Task Manager.

If the manager is run as a regular application and you are sure it is not shared.

If it failedįor some reason, you can shut it down manually from Windows Control Panel.

If the manager is run as a service and is not shared with otherĪpplications, then the installer should have already shut it down.

#Failure to obtain a verilog simulation license install

To further complicate matters, it is possible to install the license manager in a manner such that it is shared with applications from other vendors. We always recommend that the license manager is run as a service but this is not compulsory. Services are able to run when no user is logged on.

#Failure to obtain a verilog simulation license verification

ModelSim is a verification and simulation tool for VHDL, Verilog. A service is an application that runs in the background and which is started and stopped by the system. restrictions set forth in the license agreement provided with the software pursuant to. The manager could be installed as a regular application or it could be installed as a service. How you do this depends on how it was installed. The installer will be able to shut down the existing manager in some cases but won’t be able to in all situations. The license manager installer cannot run if there is already a SIMetrix-SIMPLIS license manager running on the system.